Superfast Steel Epoxy Putty Stick
Superfast Steel Epoxy Putty Stick is a steel-filled epoxy putty in an easy-to-use stick format. It has a 3-minute work time for making rapid repairs to steel, iron and other ferrous metals. Superfast Steel has WRAS approval and is most commonly used in pipe repair applications.
Each Steel Stick weighs 114g, has a nominal 22mm diameter and is 175mm long. It contains resin on the outside and hardener in the middle. The user simply cuts off the required amount of putty from the Stick and kneads by hand before applying to the substrate to be repaired or bonded.
Superfast Steel is pushed into cracks and holes in domestic and industrial pipework when pressure is turned off. It will quickly cure to a rock-hard material, sealing the leak with pressure resistance to 30 bar. WRAS approval means Superfast Steel is certified as safe to use with drinking water.
It also repairs exterior pipe surface damage caused by pitting and corrosion. Applying Superfast Steel to fill-in and rebuild weakened areas increases outer wall thickness, strengthening pipeline integrity.
Away from pipe repair, Superfast Steel fills holes in metal machinery and bonds parts together. Although the target substrate is steel, it adheres to most other materials. It sets to a grey colour to appear uniform with metalwork.
Superfast Steel is resistant to water, chemicals and temperatures up to 150ºC. It makes interior or exterior repairs. Within one hour of application, systems can be put back into full use. The cured material can be tapped, drilled, screwed, sawed, machined, ground, filed, or painted.
Superfast Steel Epoxy Putty Stick Details
To use a Superfast Steel Stick, the amount of epoxy putty required is cut off and kneaded by hand until it turns a uniform grey colour with no streaks.
Whilst soft, the putty is pushed into holes and cracks in pipes and metalwork where it will cure, sealing and filling areas of damage. For bonding, you apply the putty and use it to attach the pieces requiring repair together.
Superfast Steel has a work life of approximately 3 minutes. Within 5–10 minutes, it will harden and form a cohesive bond. A full repair is completed in one hour.
It contains no solvents or VOC’s, it is non-flammable and releases no noxious fumes. It will not shrink or pull away and the unused portion of Steel Stick stays fresh for future use when saved in its original package.
Pipe repairs made with Superfast Steel Stick can be overwrapped with a SylWrap Pipe Repair Bandage for added reinforcement. Superfast Steel and SylWrap Bandage can be purchased together as part of the SylWrap Standard Pipe Repair Kit.
Please note that for fixing a steel or iron pipe, Superfast Steel is only effective when water pressure can be turned off. For carrying out live leak pipe repairs, please see Wrap & Seal Waterproof Pipe Repair Tape.
For repairs subjected to extreme heat in excess of 150°C, please see Superfast Titanium High Temperature Epoxy Putty Stick. Superfast Titanium has been specifically formulated to offer temperature resistance up to 280°C.
Benefits of Superfast Steel Epoxy Putty Stick
- Specifically designed for use with steel, iron and similar metals
- Does not rust
- Easy to use – simply cut off the putty, knead by hand and apply
- Repairs can be carried out in under 15 minutes
Applications
- Steel repair, iron repair, other ferrous metals repair
- Large domestic pipe repair and industrial pipe repair
- Repair of small areas of damage caused by corrosion to restore surface profile
- Suitable for interior or exterior use
- Bonds steel with other metals, wood, glass, masonry, and many plastics
- WRAS approved for use on pipes carrying drinking water
TDS Downloads
Product Codes
Product Code | Stick Size |
SFST-114g | 114g |
Superfast Steel Epoxy Putty Stick Case Studies
Case Study: Boat Owner Repairs Pinhole Leak in Rubber Hose Connected to Engine
Case Study: External Surface Damage Repair to Restore Integrity of 400mm GRP Pipe
Case Study: Leaking Hydrogen Line Pipe Repair at Power Station in Puerto Rico
Case Study: Superfast Steel Epoxy Putty Used to Fix Rust Holes on a Classic Car
Case Study: Repair of a Leaking 150mm Steel 90 Degree Elbow Bend at a Quarry Wash Plant
Case Study: Repair of a Cracked 90-year-old 70mm Malleable Iron Water Supply Pipe
Case Study: ‘Impossible’ Repair of a 900mm Water Main Flange Leak in an Underground Chamber
Case Study: Magic Corner Kitchen Unit Repair Saves a Client Over £200 in Replacement Costs
Case Study: 19th Century Lantern Restoration Using Superfast Steel Epoxy Putty
Case Study: Emergency Repair of Hospital 300mm Air Conditioning Pipe on Hottest Day of June
Case Study: Repair and Reconnection of a Ruptured 20bar Cast Iron Water Supply Pipe
Case Study: Leaking Cast Iron Wastewater Pipe Repair at a London Hotel
Case Study: Pinhole Repair of a Steel Pipe in a Furniture Factory Sprinkler System
Superfast Steel Epoxy Putty Sticks Videos
Repair of a corroded leaking pipe made using Superfast Steel
Test repair carried out in the Sylmasta Lab using Superfast Steel to seal a leak on a corroded steel pipe.
Please use the form to enquire about the price and availability of
Superfast Steel Epoxy Putty Stick
Related Products
SylWrap Standard Pipe Repair Kit
The SylWrap Standard Pipe Repair Kit is used to permanently fix leaking pipes where water pressure can be turned off
Superfast Titanium Epoxy Putty Stick
Epoxy putty temperature resistant to 280°C for fixing holes in steam pipes and other pipework exposed to extreme temperatures
Sylmasta AB Original Epoxy Putty
Super-strength putty with 2 hour work time for complex repairs, including underwater and in chemically aggressive environments