Industrial Metal Epoxy Paste
Industrial Metal is a metal-filled epoxy repair paste reinforced with corrosion-resistant platelets. It protects and reinforces metalwork, fills large holes and cracks, and repairs areas of pitting. In pipe repair applications, Industrial Metal rebuilds and strengthens degraded pipelines by increasing outer wall thickness.
Where corrosion, chemical attack or other environmental factors have weakened the exterior of a pipe, Industrial Metal is applied to rebuild pipeline thickness back towards original specification. It fills damage caused by impact and pitting, restoring surface profile.
The corrosion-resistant platelets provide excellent protection for surfaces from corrosion and chemical attack, whilst also giving it a smoother finish than regular epoxy pastes when machined. Industrial Metal cures on wet surfaces. As well as metalwork, it can be applied to most plastics and wood.
Industrial Metal has been independently tested to BS 6920 standard, meaning when used in conjunction with a SylWrap Pipe Repair Bandage, it is certified to British standards as safe to use on pipes carrying drinking water.
Away from pipeline applications, it is used to repair and protect pumps, metal castings, automotive bodywork and fills large gaps and gouges.
A 60-minute gel time allows for large quantities to be mixed and carefully applied without the threat of premature curing. Because of its work time, Sylmasta recommend Industrial Metal for applications at higher ambient temperatures.
Industrial Metal Epoxy Repair Paste Details
Before applying Industrial Metal, surfaces should be free of paint, rust and grime. The substrate should then be roughened up through either grit blasting or grinding with a coarse wheel or abrasive disk pad.
Full instructions detailing the preparation process can be found on the Technical Data Sheet and are provided with the product.
Industrial Metal should be applied as soon as the preparation procedure is completed. Part A and Part B are mixed together at a 2:1 ratio by weight or volume.
The epoxy paste is then spread over the area requiring repair using a putty knife. Industrial Metal should be pushed in firmly to ensure maximum contact and to avoid trapping air between the paste and the surface.
When adding SylWrap Pipe Repair Bandage for pipe repair applications, the bandage is wrapped over Industrial Metal as soon as the epoxy paste has been applied. SylWrap will provide a rock-hard, impact resistant layer of protection, further strengthening the weakened section of pipeline.
To determine the quantity of Industrial Metal needed for a specific pipe repair application, please go to the Repair Calculator Tab and enter your repair data.
Industrial Metal has a gel time of 60 minutes. It achieves a full cure in 24 hours. It is thixotropic, meaning it will not sag.
It is virtually odourless, with no unpleasant smell compared to other epoxy pastes. Its light consistency makes it easier to mix than stiff, heavy traditional epoxy pastes.
Industrial Metal is temperature resistant to 130°C. For repairs to pipework exposed to extreme temperatures in excess of 130°C, please see Titanium Supergrade HT Epoxy Paste.
Benefits of Industrial Metal Epoxy Paste
- Cures underwater and on wet surfaces
- Does not shrink and can be machined
- Easy to mix and apply with a long working time for complex repair jobs
- Increase resistance against corrosion and chemicals
- Tested to BS 6920 standard
- Bonds to metal, most plastics and wood
Applications
- Steel pipe repair, iron pipe repair, copper pipe repair, PVC plastic pipe repair, GRP pipe repair
- Restoring surface profile for improved pipeline integrity
- Metal repair, chemical protection and corrosion protection
- Filling holes, gaps and gouges
- Rebuilding worn and damaged parts
- Underwater repairs
- Used in petrochemical plants to repair and strengthen pipes, fittings and equipment
- Repairing industrial equipment, tanks and worn areas in pumps and valves
TDS Downloads
Product Codes
| Product Code | Paste Quantity |
| PST-500g | 500g |
| PST-4x500g | 2kg (4 x 500g) |
| PST-2kg | 2kg |
| PST-5kg | 5kg |
| PST-25kg | 25kg |
Industrial Metal Epoxy Paste Repair Calculator
The below calculator can be used to determine the quantity of Industrial Metal needed to repair a damaged section of pipework.
Enter the diameter of the pipe in millimetres, the length of the repair area and the coating thickness of Industrial Metal to be applied.
Once you have entered your data, press calculate and the number of kilograms of epoxy paste required will be shown.
Industrial Metal Epoxy Paste Case Studies
Case Study: Dairy Delivery Truck 466 International Engine Cracked Timing Cover Repair
Case Study: Reinforcement of Weakened Pipe Elbow Joint on 100mm 22 bar Sulphuric Acid Line
Case Study: Industrial Metal Repairs a Large Gouge to Refurbish a Drill Base Stand
Please use the form to enquire about the price and availability of
Industrial Metal Epoxy Paste
Related Products
WearShield Alumina Filled Epoxy Paste
Alumina bead-filled epoxy paste applied to equipment to create a highly toughened layer protective against impact damage and wear
Titanium Supergrade HT Epoxy Paste
High temperature epoxy paste resistant to 250°C for damage repair and corrosion protection of systems subjected to extreme heat
Ceramic Supergrade Abrasion Resistant Paste
Epoxy paste filled with silicon carbide for the repair and protection of machinery and parts in highly abrasive environments