A homeowner makes a DIY repair to a 25mm diameter lead water supply pipe discovered to be leaking inside the wall of their property
Category: Case Studies
Case Study: Rotted Bay Sash Window Frame Undergoes Stabilisation, Repair & Restoration
A bay sash window frame rotted just eight years after installation is cleaned, stabilised and rebuilt in a repair made by the homeowner leaving no trace of damage
Case Study: Corroded & Leaking Worthington-Simpson Pump Head Repair
The inside of a Worthington Simpson pump for which replacement parts no longer exist is sealed and reinforced after pinholes were left in the casing during the removal of corrosion
Case Study: Cast Iron Waste Pipe U-Bend Crack Repair Above Hospital Corridor
A cast iron waste pipe with a hairline crack in a U-bend is repaired within the confines of a cramped roof space above a hospital corridor by a maintenance worker on top of a ladder
Case Study: SylWrap Leaking Pipe Repair Passes ASME PCC-2 402-III Qualification Standard
A leak repair using Superfast Aqua PW Epoxy Putty and SylWrap HD passes testing for ASME PCC-2 402-III Qualification – Validation for Repair of Leaking Component
Case Study: UAE Complex Approves SylWrap for Chilled Water District Cooling System Pipe Repair
After rigorous testing, Superfast Aqua PW and SylWrap HD are approved for repairing ABS pipe joints in a chilled water district cooling system at a luxury complex in the UAE
Case Study: Leaking HVAC Cooling Tower Repair at Production Facility in USA
After several failed repair attempts, a leaking HVAC cooling tower at a production facility in the USA is sealed within a matter of hours to restore full efficiency to the temperature control system
Case Study: Repair of Underground Clay Drainage Pipe Cracked During Building Work
Two cracks in an underground clay drainage pipe – one of which was severe enough to almost split the pipe into two – are sealed by a UK homeowner making a DIY repair
Case Study: SylWrap Composite Pipe Repair Passes ASME PCC-2 401-III Qualification Standard
A composite pipe repair using SylWrap HD and Industrial Metal is independently tested to exceed 309.6 bar, passing ASME PCC-2 401-III – Short Term Spool Survival qualification
Case Study: 150mm Cast Iron Soil Pipe Repair Leaking Wastewater in Hospital Roof Space
A cast iron soil pipe leaking through a two-metre horizontal crack is sealed in a confined roof space, preventing wastewater escaping into the hospital ward below
