Four cottages in a terrace of eight repair their respective sections of a leaking and corroded 48 metre long shared water supply pipe attached to the back wall of the properties
Category: Case Studies
Case Study: Copper Mine Repair Pump Housing Heavily Damaged By River Water Extraction
Pump housing left with corrosion, abrasion and wear damage after years of extracting river water full of sand, silt and other debris is repaired at a copper mine in Bulgaria
Case Study: Leaking Concrete Flood Defence Wall Repair at Multimillion Pound Dam in Scotland
Gaps in a relatively new concrete flood defence wall at a multimillion pound dam in Scotland are sealed by a civil engineering company using AB Original Epoxy Putty
Case Study: Oil Refinery Repair Cooling Pipe System Attacked by Microbially Induced Corrosion
An oil refinery carry out a major pipe repair programme after microbially induced corrosion caused welded joints in the stainless steel water cooling system to fail
Case Study: Rotted Wood Beam Repair in Renovation of Welsh Home
Large voids in a rotted wooden beam are filled to create a flat, smooth surface enabling the outside of a house to be rendered as part of a home renovation project
Case Study: Alcohol Line Live Leak Pipe Repair at Sugar Mill in Costa Rica
A sugar mill in Costa Rica seal a 70mm pipe running vertically up a tower after alcohol juice extracted during cane fermentation was found spraying out a pinhole at 2 bar pressure
Case Study: 6 Bar Live Leak Repair to 300mm Steel Pipe at Malaysia Water Treatment Plant
One week after a series of demonstrations and site visits from Sylmasta in Malaysia, a water company repair a 6 bar live leak on a 300mm steel pipe at a treatment plant
Case Study: Pipe Joints Sealed in Cast Iron Rainwater Stack Repair at London Office Block
300 pipe joints in a 250-metre-long internal cast iron rainwater stack suffering with corrosion are sealed, avoiding a total system replacement during the refurbishment of an office block
Case Study: Corrosion Protection of 600mm Ductile Pipe & Outlets in Underground Pumping Station
Corrosion protection measures are made to a ductile pipe system including three outlets and six flanges in an underground pumping station operated by a UK water company
Case Study: Underground 600mm Concrete Water Main Pipe Break Repair in Canada
A city authority in Canada repair a break in an underground 600mm diameter concrete pipe at the exact point it passed through a wall, significantly reducing levels of water loss
