Rapid 5 Minute Epoxy Adhesive
Sylmasta Rapid 5 Minute Epoxy Adhesive is a fast-working epoxy adhesive which bonds a wide range of materials including metal, ceramic, brick, concrete, wood and most hard plastics. The 5-minute initial cure offers long enough to accurately assemble parts, whilst a 30-minute handling time reduces holding and clamping.
Rapid 5 Minute sets almost transparent with bond lines under 2mm thick. It is used to repair metal castings, ceramic ornaments, furniture, stone slabs and coping. It also fixes fittings to brick, wood or plaster. It can be used for test rig manufacture and model making.
It is supplied in either a 25ml syringe or 50ml cartridge. The resin and hardener are pre-measured and extruded via a dispenser, meaning the correct 50-50 ratio is delivered for mixing.
The syringe dispenses via a plunger, whilst the cartridge requires a specialist applicator gun designed for two-part adhesives, including AllWeld and UHU. Applicator guns are available to purchase separately. For more information, please contact Sylmasta.
After mixing, Rapid 5 Minute begins to set in 3–5 minutes at 20°C. It has a handling time of 30 minutes, during which the parts being bonded need to be held together. A full cure is achieved in 4–6 hours.
Sylmasta also manufacture a more specialised metal epoxy adhesive. Metal Bond Rapid 5 Minute sets to dark-grey to better blend into metalwork, and with a formulation designed to offer outstanding adhesion to metal and other rigid materials.
Rapid 5 Minute Epoxy Adhesive Details
Parts and surfaces to be bonded must be clean, dry and free from all traces of dust, grease, oil and other materials. To improve bond strength, both surfaces can be lightly abraded prior to the application of Rapid 5 Minute.
To use a Rapid 5 Minute syringe, snap off the nozzle tip and remove the cap from between the piston rods. Extrude the required amount of epoxy. With a Rapid 5 Minute cartridge, use the applicator gun to deliver equal amounts of epoxy.
Once extruded onto a throwaway surface such as a piece of cardboard, mix the two components together using a stirrer for about 30 seconds until an even mix is achieved.
The mixed epoxy is applied to one of the surfaces to be repaired, after which the two surfaces requiring bonding are pressed or clamped together.
Rapid 5 Minute will begin to set after 3 minutes. It should be left undisturbed to achieve a functional cure for 30 minutes. A full cure is reached after 24 hours.
Once Rapid 5 Minute Epoxy has been applied, the cap should be placed on part-used cartridges for re-use of the epoxy at a later date. Under the correct conditions, Rapid 5 Minute has a shelf life of two years from the date of manufacture.
Benefits of Rapid 5 Minute Epoxy Adhesive
- Parts can be adjusted and reassembled before the epoxy adhesive sets for more accurate repairs
- 30 minute handling time reduces holding and clamping time
- Effective on all materials
Applications
- Bonding of metal, ceramic, wood and most hard plastics
- Repairing broken furniture, ornaments, appliances and castings
- Fixing fittings to brick, wood and plaster
- Manufacturing assemblies and model making
- Pipe bonding
Technical Data
Data | |
Working Time | 3 minutes |
Initial Cure | 3–5 minutes |
Handling Time | 30 minutes |
Full Cure | 4-6 hours |
Bond Line Thickness | 2mm |
Colour When Set | Almost Clear |
Product Codes
Code | Adhesive Quantity |
TR-25ml | 25ml |
TR-50ml | 50ml |
TDS Downloads
Rapid 5 Minute Epoxy Adhesive Case Studies
Case Study: Permanent Mortar and Pestle Repair Made Using Epoxy Adhesive
Case Study: Rapid 5 Minute Epoxy Adhesive Used to Repair Broken Ceramic Teapot Lid
Please use the form to enquire about the price and availability of
Rapid 5 Minute Epoxy Adhesive
Related Adhesive Products
Metal Bond Rapid 5 Minute Epoxy Adhesive
Epoxy adhesive specifically formulated for use with metal, including setting dark-grey for blending. Its additional thickness enables it to be used for gap filling and its unique thrixotropic formulation means it does not drip or run when applied to vertical surfaces.
Initial Cure: 3-5 minutes
Bond Line Thickness: 4mm
Colour When Set: Dark-grey
AllWeld 530 7 Minute Methacrylate Adhesive
Methacrylate adhesive for adhesion to hard-to-bond materials including engineered plastics, advanced composites and exotic metals. It has a work time of 7 minutes and reaches handling strength in 12 minutes for forming load bearing bonds quickly.
Initial Cure: 7 minutes
Bond Line Thickness: 4mm
Colour When Set: Off-white
CA3 Penetrating Cyanoacrylate Superglue
Low viscosity, surface insensitive cyanoacrylate superglue as thin as water which penetrates porous surfaces and flows easily into small, hard-to-access areas. Just one drop will wick into joints between parts, permanently bonding them together.
Cure Time: 3–40 seconds, dependent on substrate
Viscosity: 2-6cps
Colour When Set: Clear