Sylmasta CAE3 Penetrating Superglue is a low viscosity, surface insensitive cyanoacrylate adhesive which is as thin as water. It penetrates porous surfaces and wicks into joints, cracks and other small areas which are not easily accessed. CAE3 Superglue has a general cure time of under 5 seconds on most substrates.
It is used in repair and restoration, assembly, kit building and model making applications. Pre-assembled parts can be locked in place using CA3 Superglue. Just one drop of CAE3 will wick into joints between parts, permanently bonding them together.
CAE3 Superglue flows easily into small and hard-to-access areas. It seals porous surfaces and is thin enough to permanently set knots tied in cord. Its cyanoacrylate formulation enables it to bond difficult substrates in lower humidity situations.
It will cure in under 3 seconds on balsa and under 5 seconds on nitrile rubber, neoprene and EPDM. Cure speed on PVC is 3–10 seconds, steel 10–20 seconds and polycarbonate 10–40 seconds. For specific cure times based on substrate, please see the Technical Data Sheet.
CAE3 Superglue sets clear and has a softening point of approximately 130°C. It achieves a full cure in 24 hours and is available in 20g or 500g bottles.
Ultra-Fine Nozzles can be attached to the 20g bottle for greater control, applying drops of superglue as small as 0.5mm to create cleaner, neater glue lines. Please contact Sylmasta for more information on Ultra-Fine Nozzles.
About
CAE3 Penetrating Cyanoacrylate Superglue Details
Sylmasta CAE3 Superglue is effective on surfaces including plastic, wood, rubber, porcelain, fine china, ceramics and jewellery. Parts requiring repair are held together whilst the superglue bonds, based on the cure time for the substrate.
To ensure CAE3 Superglue is not absorbed when used with porous materials, Superglue Activator is used to coat surfaces prior to the application of the glue.
Activator acts as an accelerator for the cure time of cyanoacrylate superglue, enabling CAE3 Superglue to set instantly before it can seep into wood, card, fabrics and other absorbent surfaces.
Benefits of CAE3 Penetrating Cyanoacrylate Superglue
Flows easily into small areas
Rapid cure time for quick application
Applications
Wicking into joints or cracks after parts have been assembled
